Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar stud lights is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, solar powered cats eyes produced by our company have competitive cats eye road markers price and offers more choice to global traffic road safety market and trustworthy partners all over the world.
|Product name||Wistron SD-RS-SA5 solar road stud|
|Body material||HI-pressure casting Aluminium alloy|
|Power supply||Solar Panel (monocrystalline 2.5V/120mA)|
|Battery||Lithium battery 1.2V/600mah|
|LED||super brightness LED φ8mm 3pcs/side(double side)|
|Flashing model||flashing or constant|
|Life span||More than 3 years|
|Working model||Blinking or Constant(charging at daytime and working automatically at night)|
|Working hours||200 hrs for flashing modes,50hrs for steady modes|
|Visual distance||> 800m|
|Package||1pcs/box; 32pcs/Ctn;Weight:23.3Kg; Carton size:54*28*27cm|
Working Principle of Solar Road Stud Light
During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver's sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.
Installation Method Of Embedded Solar Road Stud
To install Solar Road Studs safely, it is of utmost importance to secure the workers and the street safely!
1. Mark the proper position for the solar road studs.
2. Clean road with a brush, to make the surface of road smooth, clean and dry.
3. Put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression
5. After 4 hours of installation, the glue will dry completely.
6. Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.
On the highway, please install the solar road studs every 5 to 8 meters.
On the ordinary roads, please install it every 3 to 5 meters.
On the Parking Lot, Garden or Dangerous Zone，pls install road stud every 0.5-2 meters
The distance between of each solar road stud also according to the actual application requirements.